Tuesday, May 5, 2020

ASTM Standards 更新擇要

20200523

A1061/A1061M - Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand has been revised to A1061/A1061M-20 developed by Committee A01.05, ASTM BOS Volume 01.04.

A143/A143M - Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement has been reapproved, available as A143/A143M-07(2020) developed by Committee A05.13, ASTM BOS Volume 01.06.

A148/A148M - Standard Specification for Steel Castings, High Strength, for Structural Purposes has been editorially changed, available as A148/A148M-20e1 developed by Committee A01.18, ASTM BOS Volume 01.02.

A194/A194M - Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both has been revised to A194/A194M-20 developed by Committee A01.22, ASTM BOS Volume 01.01.

A487/A487M - Standard Specification for Steel Castings Suitable for Pressure Service has been revised to A487/A487M-20 developed by Committee A01.18, ASTM BOS Volume 01.02.

A612/A612M - Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service has been revised to A612/A612M-20 developed by Committee A01.11, ASTM BOS Volume 01.04.

A668/A668M - Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use has been revised to A668/A668M-20a developed by Committee A01.06, ASTM BOS Volume 01.05.

B329 - Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter has been revised to B329-20 developed by Committee B09.03, ASTM BOS Volume 02.05.

B922 - Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption has been revised to B922-20 developed by Committee B09.03, ASTM BOS Volume 02.05.

B923 - Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry has been revised to B923-20 developed by Committee B09.03, ASTM BOS Volume 02.05.

C1583/C1583M - Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) has been revised to C1583/C1583M-20 developed by Committee C09.25, ASTM BOS Volume 04.02.

C1712 - Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test has been revised to C1712-20 developed by Committee C09.47, ASTM BOS Volume 04.02.

C1778 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete has been revised to C1778-20 developed by Committee C09.50, ASTM BOS Volume 04.02.

C1827 - Standard Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture is a new standard, now available. C1827-20 developed by Committee C09.48, ASTM BOS Volume 04.02.

D4601/D4601M - Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing has been reapproved, available as D4601/D4601M-04(2020) developed by Committee D08.04, ASTM BOS Volume 04.04.

D4990 - Standard Specification for Coal-Tar Glass Felt Used in Roofing and Waterproofing has been reapproved, available as D4990-97a(2020) developed by Committee D08.04, ASTM BOS Volume 04.04.

D6225/D6225M - Standard Test Method for Granule Cover of Mineral-Surfaced Roofing has been reapproved, available as D6225/D6225M-98(2020) developed by Committee D08.04, ASTM BOS Volume 04.04.

D6286/D6286M - Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization has been revised to D6286/D6286M-20 developed by Committee D18.21, ASTM BOS Volume 04.09.

E1221 - Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels has been editorially changed, available as E1221-12A(2018)e1 developed by Committee E08.07, ASTM BOS Volume 03.01.

E1304 - Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials has been editorially changed, available as E1304-97(2014)e1 developed by Committee E08.02, ASTM BOS Volume 03.01.

E1681 - Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials has been editorially changed, available as E1681-03(2013)e1 developed by Committee E08.06, ASTM BOS Volume 03.01.

E1820 - Standard Test Method for Measurement of Fracture Toughness has been editorially changed, available as E1820-20e1 developed by Committee E08.07, ASTM BOS Volume 03.01.

E1921 - Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range has been editorially changed, available as E1921-19be1 developed by Committee E08.07, ASTM BOS Volume 03.01.

E2472 - Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions has been editorially changed, available as E2472-12(2018)e1 developed by Committee E08.07, ASTM BOS Volume 03.01.

E2899 - Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending has been editorially changed, available as E2899-19e1 developed by Committee E08.07, ASTM BOS Volume 03.01.

C1435/C1435M - Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer has been revised to C1435/C1435M-20 developed by Committee C09.45, ASTM BOS Volume 04.02.

C1784 - Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products has been revised to C1784-20 developed by Committee C16.30, ASTM BOS Volume 04.06.

C639 - Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants has been reapproved, available as C639-15(2020) developed by Committee C24.20, ASTM BOS Volume 04.07.

D1327/D1327M - Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing has been reapproved, available as D1327/D1327M-04(2020) developed by Committee D08.04, ASTM BOS Volume 04.04.

D2626/D2626M - Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing has been reapproved, available as D2626/D2626M-04(2020) developed by Committee D08.04, ASTM BOS Volume 04.04.

D2940/D2940M - Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports has been revised to D2940/D2940M-20 developed by Committee D04.50, ASTM BOS Volume 04.03.

D3468/D3468M - Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing has been reapproved, available as D3468/D3468M-99(2020) developed by Committee D08.09, ASTM BOS Volume 04.04.

D5621 - Standard Test Method for Sonic Shear Stability of Hydraulic Fluids has been revised to D5621-20 developed by Committee D02.07, ASTM BOS Volume 05.02.

E1169 - Standard Practice for Conducting Ruggedness Tests has been revised to E1169-20 developed by Committee E11.20, ASTM BOS Volume 14.05.

E381 - Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings has been revised to E381-20 developed by Committee E04.01, ASTM BOS Volume 03.01.

A484/A484M - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings Editorial Review Board change A484/A484M-20a developed by Committee A01.17, ASTM BOS Volume 01.03.

C1170/C1170M - Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table has been revised to C1170/C1170M-20 developed by Committee C09.45, ASTM BOS Volume 04.02.

C1353/C1353M - Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser has been revised to C1353/C1353M-20 developed by Committee C18.01, ASTM BOS Volume 04.07.

C1898 - Standard Test Methods for Determining the Chemical Resistance of Concrete Products to Acid Attack is a new standard, now available. C1898-20 developed by Committee C13.03, ASTM BOS Volume 04.05.

C918/C918M - Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength has been revised to C918/C918M-20 developed by Committee C09.61, ASTM BOS Volume 04.02.

C981 - Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks has been revised to C981-20 developed by Committee D08.22, ASTM BOS Volume 04.04.

D3161/D3161M - Standard Test Method for Wind Resistance of Steep Slope Roofing Products (Fan-Induced Method) has been revised to D3161/D3161M-20 developed by Committee D08.02, ASTM BOS Volume 04.04.

D36/D36M - Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) has been reapproved, available as D36/D36M-14(2020) developed by Committee D08.03, ASTM BOS Volume 04.04.

D3878 - Standard Terminology for Composite Materials has been revised to D3878-20a developed by Committee D30.01, ASTM BOS Volume 15.03.

D4175 - Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants has been revised to D4175-20a developed by Committee D02.95, ASTM BOS Volume 05.02.

D5759 - Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses has been reapproved, available as D5759-12(2020) developed by Committee D34.03, ASTM BOS Volume 11.04.

D7115 - Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading has been revised to D7115-20 developed by Committee D04.20, ASTM BOS Volume 04.03.

D7870/D7870M - Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure has been revised to D7870/D7870M-20 developed by Committee D04.22, ASTM BOS Volume 04.03.

D906 - Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading has been revised to D906-20 developed by Committee D14.30, ASTM BOS Volume 15.06.

E1347 - Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry has been reapproved, available as E1347-06(2020) developed by Committee E12.02, ASTM BOS Volume 06.01.

E2510 - Standard Test Method for Torque Calibration or Conformance of Rheometers has been revised to E2510-20 developed by Committee E37.08, ASTM BOS Volume 14.05.

F1438 - Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components has been reapproved, available as F1438-93(2020) developed by Committee F01.10, ASTM BOS Volume 10.04.

--

A148/A148M - Standard Specification for Steel Castings, High Strength, for Structural Purposes has been revised to A148/A148M-20 developed by Committee A01.18, ASTM BOS Volume 01.02.

A27/A27M - Standard Specification for Steel Castings, Carbon, for General Application has been revised to A27/A27M-20 developed by Committee A01.18, ASTM BOS Volume 01.02.

A322 - Standard Specification for Steel Bars, Alloy, Standard Grades has been editorially changed, available as A322-13(2018)e1 developed by Committee A01.15, ASTM BOS Volume 01.05.

A484/A484M - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings Editorial Review Board change A484/A484M-20 developed by Committee A01.17, ASTM BOS Volume 01.03.

A732/A732M - Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures has been revised to A732/A732M-20 developed by Committee A01.18, ASTM BOS Volume 01.02.

A834 - Standard Specification for Common Requirements for Iron Castings for General Industrial Use has been reapproved, available as A834-95(2020) developed by Committee A04.01, ASTM BOS Volume 01.02.

A955/A955M - Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement has been revised to A955/A955M-20c developed by Committee A01.05, ASTM BOS Volume 01.04.

A978/A978M - Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications (Withdrawn 2020) has been withdrawn, with no replacement. A978/A978M-08(2013) developed by Committee A05.17, ASTM BOS Volume 01.06.

C14 - Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe has been revised to C14-20 developed by Committee C13.01, ASTM BOS Volume 04.05.

C14M - Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric) has been revised to C14M-20 developed by Committee C13.01, ASTM BOS Volume 04.05.

C418 - Standard Test Method for Abrasion Resistance of Concrete by Sandblasting has been revised to C418-20 developed by Committee C09.62, ASTM BOS Volume 04.02.

D3987 - Standard Practice for Shake Extraction of Solid Waste with Water has been reapproved, available as D3987-12(2020) developed by Committee D34.01.04, ASTM BOS Volume 11.04.

D5088 - Standard Practice for Decontamination of Field Equipment Used at Waste Sites has been revised to D5088-20 developed by Committee D18.21, ASTM BOS Volume 04.08.

D5/D5M - Standard Test Method for Penetration of Bituminous Materials has been revised to D5/D5M-20 developed by Committee D04.44, ASTM BOS Volume 04.03.

D692/D692M - Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures has been revised (with title change) to D692/D692M-20 developed by Committee D04.50, ASTM BOS Volume 04.03.

D7173 - Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt has been revised to D7173-20 developed by Committee D04.47, ASTM BOS Volume 04.03.

D8199 - Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control has been revised to D8199-20 developed by Committee D18.25, ASTM BOS Volume 04.09.

D946/D946M - Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction has been revised to D946/D946M-20 developed by Committee D04.40, ASTM BOS Volume 04.03.

E11 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves has been revised to E11-20 developed by Committee E29.01, ASTM BOS Volume 14.02.

E1266 - Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications has been revised to E1266-20 developed by Committee D34.03, ASTM BOS Volume 11.04.

E2714 - Standard Test Method for Creep-Fatigue Testing has been reapproved, available as E2714-13(2020) developed by Committee E08.05, ASTM BOS Volume 03.01.

E3066 - Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass has been revised to E3066-20 developed by Committee E48.80, ASTM BOS Volume 05.06.

E917 - Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems has been editorially changed, available as E917-17e1 developed by Committee E06.81, ASTM BOS Volume 04.11.

F1376 - Standard Guide for Metallurgical Analysis for Gas Distribution System Components has been reapproved, available as F1376-92(2020) developed by Committee F01.10, ASTM BOS Volume 10.04.

F1394 - Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves has been reapproved, available as F1394-92(2020) developed by Committee F01.10, ASTM BOS Volume 10.04.

---


A955/A955M - Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement has been revised to A955/A955M-20a developed by Committee A01.05, ASTM BOS Volume 01.04.

C42/C42M - Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete has been revised to C42/C42M-20 developed by Committee C09.61, ASTM BOS Volume 04.02.

C482 - Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste has been revised to C482-20 developed by Committee C21.06, ASTM BOS Volume 15.02.

E1057 - Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems has been editorially changed, available as E1057-15(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.11.

E1074 - Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems has been editorially changed, available as E1074-15(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.11.

E1121 - Standard Practice for Measuring Payback for Investments in Buildings and Building Systems has been editorially changed, available as E1121-15(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.11.

E1185 - Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems has been editorially changed, available as E1185-15(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.11.

E1369 - Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems has been editorially changed, available as E1369-15(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.11.

E1557 - Standard Classification for Building Elements and Related Sitework—UNIFORMAT II has been editorially changed, available as E1557-09(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.11.

E2204 - Standard Guide for Summarizing the Economic Impacts of Building-Related Projects has been editorially changed, available as E2204-15(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.12.

E2506 - Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities has been editorially changed, available as E2506-15(2020)e1 developed by Committee E06.81, ASTM BOS Volume 04.12.

C1528/C1528M - Standard Guide for Selection of Dimension Stone has been revised to C1528/C1528M-20 developed by Committee C18.08, ASTM BOS Volume 04.07.

C185 - Standard Test Method for Air Content of Hydraulic Cement Mortar has been revised to C185-20 developed by Committee C01.21, ASTM BOS Volume 04.01.

C348 - Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars has been revised to C348-20 developed by Committee C01.27, ASTM BOS Volume 04.01.

C472 - Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete has been revised to C472-20 developed by Committee C11.01, ASTM BOS Volume 04.01.


No comments:

Post a Comment