Thursday, September 13, 2018

待整理規範

GB/T 19587-2004 气体吸附BET法测定固态物质比表面积标准
JC/T 2074-2011烟气脱硫石膏
Flue gas desulfurization gypsum
EN 15167-1

BS 1881-210:2013

AASHTO T180
AASHTO T224

ASTM D6087-08(2015)e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
ASTM D4748-10(2015) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

ASTM D4070-15 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

ASTM D6938-17a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)

ASTM D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

ASTM D5265-09(2016) Standard Test Method for Bridge Impact Testing

ASTM D1143/D1143M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

ASTM D6760-16 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

ASTM D3966/D3966M-07(2013)e1 Standard Test Methods for Deep Foundations Under Lateral Load

ASTM D6432-11 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

ASTM D6639-18 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations

ASTM D6820-18 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Site Characterization

ASTM D7400/D7400M-19 Standard Test Methods for Downhole Seismic Testing

ASTM D7046-11 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration

ASTM D6429-99(2011)e1 Standard Guide for Selecting Surface Geophysical Methods

ASTM D7929-14 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells

ASTM E2103/E2103M-19 Standard Classification for Bridge ElementsUNIFORMAT II

ASTM D2166/D2166M-16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

ASTM E2278-13(2019) Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage

ASTM E2277-14(2019) Standard Guide for Design and Construction of Coal Ash Structural Fills

ASTM E2243-13(2019) Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation

ASTM E2060-06(2014) Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes


No comments:

Post a Comment